Thank you for taking interest in the Panex Inc part number 573A, a Resolver Electrical product that we stock that is presented alongside the NSN 5990-01-025-7465 for ease of identification. If you would like to learn more about this component and secure purchasing options for your consideration, please fill out and submit the Request for Quote (RFQ) form that is offered below. All we ask is that you supply us with enough information to best accommodate any particular requirements or restrictions that you may have, and we will respond with a curated quote within 15 minutes of our receipt and review.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to ensure that customers only receive precise items of need, opting to arrange our collection by diverse, commonly recognized forms of data. For instance, part number 573A specifically traces back to Panex Inc through the CAGE Code 63928, a distinct identifier for one of their physical locations. Moreover, with the NSN 5990-01-025-7465, this listing falls within Federal Supply Code (FSC) 5990 Synchros and Resolvers, enabling one to figure out its basic application. Keeping this in mind, do not hesitate to obtain a competitive quote for part number 573A here on Aero OEM Parts at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-025-7465 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 010257465 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| U217508 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND,ROTATABLE STATOR B |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.3170 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0600 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.0590 NOMINAL MILS AND 1.0670 NOMINAL CENTIMETERS |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4290 INCHES MINIMUM SINGLE SHAFT AND 0.4510 INCHES MAXIMUM SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR,2 STATOR,2 COMPENSATOR,2 RESISTOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 500000.00 MINIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 500.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 35.00 NOMINAL |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 MAXIMUM |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVF | PHASE SHIFT ANGLE IN DEG | 0.100 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 20.00 INPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0/3.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1/0.1 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0/3.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 30.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 15.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.250 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION H AND CONNECTION R2 POSITION G AND CONNECTION R3 POSITION E AND CONNECTION R4 POSITION J AND CONNECTION S1 POSITION L AND CONNECTION S2 POSITION L AND CONNECTION S3 POSITION K AND CONNECTION S4 POSITION N AND |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.9660 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | SIDE |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| FEAT | SPECIAL FEATURES | SPUR GEAR |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
