Thank you for taking interest in the Napco International Llc part number 1B7112, a Gear Helical product that we stock that is presented alongside the NSN 3020-00-517-1118 for ease of identification. If you would like to learn more about this component and secure purchasing options for your consideration, please fill out and submit the Request for Quote (RFQ) form that is offered below. All we ask is that you supply us with enough information to best accommodate any particular requirements or restrictions that you may have, and we will respond with a curated quote within 15 minutes of our receipt and review.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to ensure that customers only receive precise items of need, opting to arrange our collection by diverse, commonly recognized forms of data. For instance, part number 1B7112 specifically traces back to Napco International Llc through the CAGE Code 95201, a distinct identifier for one of their physical locations. Moreover, with the NSN 3020-00-517-1118, this listing falls within Federal Supply Code (FSC) 3020 Gear Pulley Sprocket and Transmission Chain, enabling one to figure out its basic application. Keeping this in mind, do not hesitate to obtain a competitive quote for part number 1B7112 here on Aero OEM Parts at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-517-1118 Item PartTypeName: GEAR,HELICAL | 3020 | 005171118 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1B7112 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 7.0000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 197.0 BRINELL STANDARD MINIMUM OVERALL AND 235.0 BRINELL STANDARD MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.198 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 39.5167 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.498 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.251 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.746 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.077 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 1.937 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.236 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 3.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 3800 PSI MIN TENSILE STRENGTH,0.094 IN. BY 30 DEG CHAMFER ON BORE 1ST END,KEYWAY 7 DEG 26 MIN 15 SEC CW FROM CENTER LINE OF GEAR SPOKE TO CENTERLINE OF KEYWAY,TIMING PUNCH MARK ON CENTER OF SPACE ON OPPOSITE SIDE FROM TURNED DOWN HUB |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
