Thank you for taking interest in the Illinois Tool Works Inc part number 7108155-4, a Gear Helical product that we stock that is presented alongside the NSN 3020-01-494-4274 for ease of identification. If you would like to learn more about this component and secure purchasing options for your consideration, please fill out and submit the Request for Quote (RFQ) form that is offered below. All we ask is that you supply us with enough information to best accommodate any particular requirements or restrictions that you may have, and we will respond with a curated quote within 15 minutes of our receipt and review.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to ensure that customers only receive precise items of need, opting to arrange our collection by diverse, commonly recognized forms of data. For instance, part number 7108155-4 specifically traces back to Illinois Tool Works Inc through the CAGE Code 5G804, a distinct identifier for one of their physical locations. Moreover, with the NSN 3020-01-494-4274, this listing falls within Federal Supply Code (FSC) 3020 Gear Pulley Sprocket and Transmission Chain, enabling one to figure out its basic application. Keeping this in mind, do not hesitate to obtain a competitive quote for part number 7108155-4 here on Aero OEM Parts at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-494-4274 Item PartTypeName: GEAR,HELICAL | 3020 | 014944274 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7108115-4 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 67 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE |
| MATT | III MATERIAL | STEEL COMP E9310 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
