Thank you for taking interest in the Clarostat Sensors And Controls part number CM45310, a Resistor Variable Nonwire Wound product that we stock that is presented alongside the NSN 5905-01-310-6824 for ease of identification. If you would like to learn more about this component and secure purchasing options for your consideration, please fill out and submit the Request for Quote (RFQ) form that is offered below. All we ask is that you supply us with enough information to best accommodate any particular requirements or restrictions that you may have, and we will respond with a curated quote within 15 minutes of our receipt and review.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to ensure that customers only receive precise items of need, opting to arrange our collection by diverse, commonly recognized forms of data. For instance, part number CM45310 specifically traces back to Clarostat Sensors And Controls through the CAGE Code 12697, a distinct identifier for one of their physical locations. Moreover, with the NSN 5905-01-310-6824, this listing falls within Federal Supply Code (FSC) 5905 Resistors, enabling one to figure out its basic application. Keeping this in mind, do not hesitate to obtain a competitive quote for part number CM45310 here on Aero OEM Parts at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-310-6824 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013106824 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM45310 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.563 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.615 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | HAVE QUICK II |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | 0.106 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 255.0 MINIMUM AND 265.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 11 OCLOCK |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 4:30 OCLOCK |
| CQTM | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
