Thank you for taking interest in the California Instruments Corp part number 7-54240, a Resistor Variable Wire Wound Non product that we stock that is presented alongside the NSN 5905-00-240-1662 for ease of identification. If you would like to learn more about this component and secure purchasing options for your consideration, please fill out and submit the Request for Quote (RFQ) form that is offered below. All we ask is that you supply us with enough information to best accommodate any particular requirements or restrictions that you may have, and we will respond with a curated quote within 15 minutes of our receipt and review.
Note : We Will Not Share Your Information To Any Third Parties.
We strive to ensure that customers only receive precise items of need, opting to arrange our collection by diverse, commonly recognized forms of data. For instance, part number 7-54240 specifically traces back to California Instruments Corp through the CAGE Code 16067, a distinct identifier for one of their physical locations. Moreover, with the NSN 5905-00-240-1662, this listing falls within Federal Supply Code (FSC) 5905 Resistors, enabling one to figure out its basic application. Keeping this in mind, do not hesitate to obtain a competitive quote for part number 7-54240 here on Aero OEM Parts at your earliest convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-240-1662 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 002401662 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7-54240 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.081 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 7.50 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACE GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
